CyberPanel configured repositories failed — CyberPanel - WebHosting Control Panel for OpenLiteSpeed
CyberLoader

CyberPanel configured repositories failed

Hello,
I am using CyberPanel (OpenLiteSpeed ) on CentOS 7, when I am trying to update through Terminal Command then an error message comes and is as:
[[email protected] ~]# yum update -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 7.6 kB 00:00:00
* base: repo1.dal.innoscale.net
* epel: d2lzkl7pfhq30w.cloudfront.net
* extras: mirror.cs.vt.edu
* updates: mirror.atlanticmetro.net
https://rep.cyberpanel.net/repodata/repomd.xml: [Errno 14] curl#60 - "Peer's Certificate has expired."
Trying other mirror.
It was impossible to connect to the CentOS servers.
This could mean a connectivity issue in your environment, such as the requirement to configure a proxy,
or a transparent proxy that tampers with TLS security, or an incorrect system clock.
You can try to solve this issue by using the instructions on https://wiki.centos.org/yum-errors
If above article doesn't help to resolve this issue please use https://bugs.centos.org/.



One of the configured repositories failed (CyberPanel),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

1. Contact the upstream for the repository and get them to fix the problem.

2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).

3. Run the command with the repository temporarily disabled
yum --disablerepo=CyberPanel ...

4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:

yum-config-manager --disable CyberPanel
or
subscription-manager repos --disable=CyberPanel

5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:

yum-config-manager --save --setopt=CyberPanel.skip_if_unavailable=true

failure: repodata/repomd.xml from CyberPanel: [Errno 256] No more mirrors to try.
https://rep.cyberpanel.net/repodata/repomd.xml: [Errno 14] curl#60 - "Peer's Certificate has expired."
[[email protected] ~]#

I am appreciating for any help to fix this issue.
Thanks

Comments

  • Remove this repository it is no longer needed.
  • Hello @usmannasir
    Sorry for late reply, it's due to my family suffering with COVID.
    How can I Remove this repository?
    Is there any Command through which I can do it?
    What's happened when I Removed this repository, can my CyberPanel works after this Removal?
    Please help me for doing this, I am heartily appreciating for the help.
    Thanks
  • You can use this guide https://www.inmotionhosting.com/support/product-guides/dedicated-hosting/delete-repos-centos/
  • Hello @usmannasir
    I am in trouble and need help, please look at this:

    [[email protected] ~]# yum remove https://rep.cyberpanel.net/repodata/repomd.xml
    Loaded plugins: fastestmirror
    No Match for argument: https://rep.cyberpanel.net/repodata/repomd.xml
    No Packages marked for removal
    [[email protected] ~]# yum update -y
    Loaded plugins: fastestmirror
    Loading mirror speeds from cached hostfile
    epel/x86_64/metalink | 6.6 kB 00:00:00
    * base: mirror.vtti.vt.edu
    * epel: dl.fedoraproject.org
    * extras: mirror.atl.genesisadaptive.com
    * updates: mirror.atl.genesisadaptive.com
    https://rep.cyberpanel.net/repodata/repomd.xml: [Errno 14] curl#60 - "Peer's Certificate has expired."
    Trying other mirror.
    It was impossible to connect to the CentOS servers.
    This could mean a connectivity issue in your environment, such as the requirement to configure a proxy,
    or a transparent proxy that tampers with TLS security, or an incorrect system clock.
    You can try to solve this issue by using the instructions on https://wiki.centos.org/yum-errors
    If above article doesn't help to resolve this issue please use https://bugs.centos.org/.



    One of the configured repositories failed (CyberPanel),
    and yum doesn't have enough cached data to continue. At this point the only
    safe thing yum can do is fail. There are a few ways to work "fix" this:

    1. Contact the upstream for the repository and get them to fix the problem.

    2. Reconfigure the baseurl/etc. for the repository, to point to a working
    upstream. This is most often useful if you are using a newer
    distribution release than is supported by the repository (and the
    packages for the previous distribution release still work).

    3. Run the command with the repository temporarily disabled
    yum --disablerepo=CyberPanel ...

    4. Disable the repository permanently, so yum won't use it by default. Yum
    will then just ignore the repository until you permanently enable it
    again or use --enablerepo for temporary usage:

    yum-config-manager --disable CyberPanel
    or
    subscription-manager repos --disable=CyberPanel

    5. Configure the failing repository to be skipped, if it is unavailable.
    Note that yum will try to contact the repo. when it runs most commands,
    so will have to try and fail each time (and thus. yum will be be much
    slower). If it is a very temporary problem though, this is often a nice
    compromise:

    yum-config-manager --save --setopt=CyberPanel.skip_if_unavailable=true

    failure: repodata/repomd.xml from CyberPanel: [Errno 256] No more mirrors to try.
    https://rep.cyberpanel.net/repodata/repomd.xml: [Errno 14] curl#60 - "Peer's Certificate has expired."
    [[email protected] ~]#

    I appreciate for the help to fix this issue.
    Thanks
  • Hello @usmannasir
    Sorry for my previous post as I am new for this so this happened; Sorry
    When I am goes with Terminal Command:
    [[email protected] ~]# yum repolist
    repo id
    CyberPanel
    base/7/x86_64
    copr:copr.fedorainfracloud.org:copart:restic/x86_64
    dovecot-2.3-latest/7/x86_64
    epel/x86_64
    extras/7/x86_64
    gf/x86_64
    litespeed/7/x86_64
    litespeed-update/7/x86_64
    lux/7
    mariadb
    powerdns-auth-42/7/x86_64
    updates/7/x86_64
    repolist: 29,666

    Now Can I Go With:
    [[email protected]~]# yum remove CyberPanel

    Before connecting my Server to CyberPanel Cloud or I can execute this Command after connecting my server to CyberPanel Cloud?

    Please help me and Sorry for my previous post.

    Thanks
  • Type your comment> @usmannasir said:
    > Remove this repository it is no longer needed.

    Hello, @usmannasir
    Please tell me which repository as I have mentioned my all repolist.

    Please help me.

    Thanks
Sign In or Register to comment.
CyberPanel Discord

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion