Can't Login Into Rainloop

Comments

• mmarquette

  August 2019

  go to https://yourdomain.com:8090/rainloop/?admin
  
  login: admin
  password: 12345
  
  then domains
  
  and add you domain there with the according information and it will work that's what i did here.

  Share on Facebook
• whattheserver

  September 2019

  if you run into this also disable the whitelist/blacklist plugins if enabled in rainloop/?admin. this was one of the reasons i ran into webmail auth failed but it worked via SMTP IMAP etc.

  Share on Facebook
• Noktis

  November 2019

  I used to have the same problem, that's why i couldn't use RainLoop on my server.
  
  Thanks to whattheserver, his solution worked for me!
  
  I also tried to switch between different configurations of the plugins - and the exact problem was with "white-list".
  "black-list" works fine without "Authentication failed".
  
  So, if you have issue with "Authentication failed" in RainLoop, just try to turn off every plugin and then one-by-one turn them on. You'll definitely find the reason of the problem!

  Share on Facebook
• billyf

  June 2020

  this is happening now with the new update I cannot login

  Share on Facebook
• guisaldanha

  December 2020

  I tried three passwords to access https://xxxxxx.xxx:8090/rainloop/?admin
  12345
  1234567
  and the password to access the CyberPanel
  None worked, does anyone know where I can get or change this password?

  Share on Facebook
• Master3395

  January 7

  I have the same issue, can't log in at all.
  I have tried all the steps over, but no help.

  Share on Facebook
• kowalski215

  January 9 edited January 9

  New Cyberpanel instances do not have 12345 or 1234567 as default password for rainloop. Run
  cat /usr/local/CyberCP/public/rainloop.php
  (sudo if needed), to get the password and then login via the web admin as usual

  Share on Facebook